Tools of The Trade for Electricians
Each trade has its own requirements for procuring the right set of tools to perform tasks. Many of these tools are essential and workers must use them to ensure effectiveness, safety, and for doing their jobs at a satisfactory level. When purchasing quality of specialist tools you should also consider protecting them against damage or theft with Insurance for electricians. Below is a list of a few tools which electricians can invest in to make their job easier.
A good pair of pliers should be part of every electrician’s work kit. The handles must have a comfortable grip and should open and close smoothly and easily. It may be beneficial to have different sets of pliers for different chores.
In addition to the traditional set of pliers, you can get a pair for cutting sides and diagonally. This will be helpful in cutting down wires to a specific length. You can also purchase long-nosed pliers, which make it easier for you to reach small areas. Tongue and groove pliers can help remove knockouts from metal electrical boxes and tighten clamps.
- Wire strippers
Wire strippers are used to trim and strip insulation from electrical wires. Choose one that has comfortable handles and an easy grip. Strippers with cutting teeth can allow you to cut wire ends at the same time.
- Voltage tester
Electricians must keep a voltage tester handy to make sure that there is no voltage in an electrical device or wire prior to working with it. This gives you a necessary layer of safety while working with wires or other devices. A no-contact voltage tester is a good option to invest in if you can find one. It can help detect electric current without touching the object.
- Tape measure
Measurements are a frequent component of an electrician’s job and therefore should be readily available. There is a wide variety of tape measures in the market to select from. Choose the type that you think would work best for your needs.
A lot of electrical work happens in dark places where it can be hard to do the job without a consistent source of light. A torch can be useful in this regard and must be kept in the work kit at all times.
- Nut drivers and screwdrivers
Nut drivers and screwdrivers may not necessarily be only in an electrician’s work kit. Nearly every household in the world has some sort of screwdriver in a personal toolbox. Although, there are some screwdrivers that have been manufactured specifically for electrical work, which you should keep with you. If you do not have them, make sure to at least have flathead screwdrivers since they can help in installing and removing switches, outlets, cover plates, and much more.
A multimeter can be used to measure a range of electrical properties such as resistance, voltage, DC voltage and current, and current. Multimeters are found as digital or analog devices. Newer versions have sophisticated whistles, bells, and thermal imaging cameras.
A level can indicate whether a structure is even prior to accomplishing a job. Checking a structure is necessary before working on it to avoid issues later. A level can help you address this and make sure your work is plumb before you hand it over to the customer.
Hammers are another essential item which electricians should keep handy. If you are doing electrical work in a construction area, you will certainly want to have a hammer. A claw hammer enables you to remove nails and wood chips when you are making space for wires. Ensure that you invest in a hammer whose handle fits your hand and gives you a good grip while you are swinging it.
- Pipe reamer
This tool can help make the edges of the cut conduit smooth. When the rough edges are made smooth, your wiring is less prone to getting snagged or cut. Some types of pipe reamers help you in making the conduit smoother and in tightening fittings without changing to a different tool.
- Channel locks
Channel locks can be especially useful in installing conduits. These adjustable workhorses come in different sizes. The 2 ¼ inch locks should be used if you are working on conduit with a diameter of two inches or less. The 5 ½ inch channel locks should be used on pipes or conduit that are larger than two inches.
- Circuit finder
Finding a circuit finder in each home might be a challenging thing to do. Even when it is present, the service panel may rarely be matched with the complementary breaker. This is where circuit finders can be of use. They can help you easily detect a circuit. You can use it by plugging the transmitter into the outlet, which would allow it to trace the circuit.
- Utility knives
These portable tools are sure to be handy for a wide range of purposes.
12 Tools Every Electrician Needs, Platinum Business Inspiration, date viewed 3 January 2021, <https://www.platinumelectricians.com.au/blog/tools-every-electrician-needs/>