The Top 10 Tips To Get More From Your Radiators
Our home radiators are essential for us to stay warm during cold winters. However, that doesn’t mean you should take them for granted. Radiators could be cared for and kept in the best conditions possible if you want them to last longer, run smoothly, and give you a good return on the investment you made on your heating system.
In this article, we will provide you with our top ten tips for getting the very best performance from your radiators.
Bleed your radiators
It is one of the simplest things you can do to improve your radiator performance. Bleeding a radiator gets rid of air that has collected at the top of the radiator, preventing your radiator from heating up properly.
If bleeding your radiators sounds like something you can’t do yourself, you can always call in a local heating engineer who will be able to help you.
Insulate the pipes
It is simple to do and will make a difference in how effectively the radiator is heating your room.
The pipe should be completely covered and insulated before you attach the radiator. The insulation should wrap around the lines, with no gaps where the heat could escape. Try to buy enough to go all around each pipe, and then you can cut it to size once you’ve wrapped it around the pipe.
A timer thermostat can be installed on most radiators and will control the heat output, making sure that they only heat when necessary. It’s important to remember that this is not the same as a room thermostat, which controls the central heating system rather than individual radiators.
Positioning a radiator strategically
Radiators are often positioned against the coldest wall, directly under a window or door. It is far from ideal as it can cause the heat to escape through the window and outside. Instead, position your radiator away from the wall to allow air to flow through easily and heat the room.
The best place for your radiator is on an external wall, allowing it to transfer heat more efficiently. If you have an internal wall, place the radiator as close as possible to the exterior wall.
Check and clean the radiators
Clean the radiator from time to time. Use a vacuum cleaner to get rid of dust and dirt that may have accumulated on its surface.
Check for signs of rust or corrosion on your pipes and valves. Use steel wool or wire brush to remove them if you see any. You can also use sandpaper to get rid of the rust stains and smooth out rough edges on metal surfaces.
Make sure there are no loose parts inside the machine that could cause problems later. For example, if you hear rattling sounds coming from inside your radiator when turning on your heater, something might be wrong with its fan belt. Try replacing this part before going through a significant repair job yourself!
Insulate Your Windows
Insulating your windows is a simple way to improve things by reducing the amount of heat loss through them. It is essential if you have old single-pane windows, though it’s still worth doing even if you have double-glazing (or even triple-glazing).
The easiest option for insulating your windows is window insulation film. This thin plastic film is held in place with double-sided tape that allows light through while blocking drafts and protecting against heat loss.
Maximize Sunlight Exposure
Maximize the energy of radiator energy-saving potential by ensuring they’re exposed to direct sunlight. During the winter, heat naturally rises to the home’s upper level, which means that the lower floors will be cooler than the top floor.
To help compensate for this temperature difference, open blinds or curtains on windows that receive direct sunlight during the day. It allows the sun’s rays to hit radiators and heat rooms more efficiently.
Use radiator booster fans
The way that a radiator booster fan works is straightforward. It sits on top of your radiator and draws in cool air from the surrounding area, and it then pushes this air over the radiator element forcing the warm air out into the room faster than would otherwise happen.
As a result, you will feel more warmth from the radiator, and your room will become warmer much more quickly. It means that you will be able to turn off your central heating sooner, save money on your energy bills, and stay toastier on colder days!
Install radiator reflectors
Another simple way to improve the efficiency of your radiators is to install radiator reflector panels behind them. These panels help to reflect heat into the room instead of allowing it to escape through walls and windows, meaning that less energy is needed for heating your home.
It also means that you don’t need your heating system turned up so high to keep warm, which can help bring down your energy bills!
Paint your radiators
One way to improve the performance of your radiators is to paint them. Painting your radiators may seem like a strange thing to do, but it can make a significant difference in their efficiency.
Unpainted metal radiators are not very efficient. They lose about half of their heat through the metal and into the air around them. Painting them with special paint that reflects heat can improve the efficiency of your radiators by over 60%.
The paint you need for this job is called insulating pain, and it acts both as a heat reflector and an insulator to prevent heat loss through the metal surface of your radiators.